|
| МОК: | 1 |
| цена: | To be quoted |
| Стандартная упаковка: | safety carton pack or plywood box |
| Способ оплаты: | T/T |
| Standards | GB4943.1-2022 Appendix H, IEC62368-1:2018 |
|---|---|
| Sampling module bandwidth | 200MHz |
The KP-368H Telephone Ringing Signal Tester is a specialized test instrument designed for electrical safety testing. It accurately simulates telephone network environments to evaluate telephone ring signals, featuring two built-in test methods (Method A and Method B). Compliant with international standards GB4943.1-2022 and IEC62368-1:2018, this tester verifies whether measured currents or voltages meet standard requirements under various operating conditions.
The instrument features an integrated industrial control host with built-in oscilloscope measurement module and real-time waveform display interface. This intuitive design provides clear visualization of operating parameters and instrument status. With its excellent performance, high reliability, and cost-effectiveness, the KP-368H is the preferred choice for electrical safety testing laboratories and electronics manufacturers.
| Technical Parameter | Specification |
|---|---|
| Comply with standards | GB4943.1-2022 Appendix H, IEC62368-1:2018 |
| Sampling module bandwidth | 200MHz |
| Sampling rate | 1Gsa/s |
| Sampling accuracy | ±2% of reading |
| Range | 250V(RMS) |
| Method A measurement parameters |
|
| Method B measurement parameters |
|
| Disconnect device | Variable resistor: 500-2000Ω, step 100Ω |
| Peak-to-peak current measurement | Monitor voltage |
| Input power | AC 220V±10%,50Hz/60Hz |
| Dimensions | 600*500*280mm |
| Weight | About 15 kg |
Видео
|
|
| МОК: | 1 |
| цена: | To be quoted |
| Стандартная упаковка: | safety carton pack or plywood box |
| Способ оплаты: | T/T |
| Standards | GB4943.1-2022 Appendix H, IEC62368-1:2018 |
|---|---|
| Sampling module bandwidth | 200MHz |
The KP-368H Telephone Ringing Signal Tester is a specialized test instrument designed for electrical safety testing. It accurately simulates telephone network environments to evaluate telephone ring signals, featuring two built-in test methods (Method A and Method B). Compliant with international standards GB4943.1-2022 and IEC62368-1:2018, this tester verifies whether measured currents or voltages meet standard requirements under various operating conditions.
The instrument features an integrated industrial control host with built-in oscilloscope measurement module and real-time waveform display interface. This intuitive design provides clear visualization of operating parameters and instrument status. With its excellent performance, high reliability, and cost-effectiveness, the KP-368H is the preferred choice for electrical safety testing laboratories and electronics manufacturers.
| Technical Parameter | Specification |
|---|---|
| Comply with standards | GB4943.1-2022 Appendix H, IEC62368-1:2018 |
| Sampling module bandwidth | 200MHz |
| Sampling rate | 1Gsa/s |
| Sampling accuracy | ±2% of reading |
| Range | 250V(RMS) |
| Method A measurement parameters |
|
| Method B measurement parameters |
|
| Disconnect device | Variable resistor: 500-2000Ω, step 100Ω |
| Peak-to-peak current measurement | Monitor voltage |
| Input power | AC 220V±10%,50Hz/60Hz |
| Dimensions | 600*500*280mm |
| Weight | About 15 kg |
